Kinetic Systems Corporation 3655-L1A 8-Channel Timing Pulse Generator CAMAC Mod.

Description

Kinetic Systems Corporation 3655-L1A 8-Channel Timing Pulse Generator CAMAC
The Model 3655 is a single-width CAMAC module containing a 16-bit counter and eight 16-bit set-point registers that are compared with the counter.
Features:
Eight independent outputs
Self-contained crystal clock
Provision for external clock
Option for high-true or low-true output pulses
LAM status bit associated with each output channel
8-bit LAM mask register
Clock variations from one hertz
Clock rate under software control
Ability to cycle through any number of channels from one to eight
Ability to control Dataway Inhibit
Ability to cycle once and stop or to continue cycling
Ability to start cycle by external signal or by internal command
The Model 3655 is a single-width CAMAC module containing a 16-bit counter and eight 16-bit set-point registers that are compared with the counter. The comparisons produce output pulses, and any of them can be used to either stop or clear the counter. The comparisons also produce LAM status bits, which can be individually enabled to produce LAM requests. A flag bit determines whether the counter stops with the last output pulse or whether it is cleared to produce repeating sequences of timing pulses. In the former mode of operation, additional pulse sequences are initiated either by programmed command or by external signal or contact closure. The 3655 provides its own crystal clock, and the input frequency to the counter is software-controlled for any decade from one hertz to one megahertz. Input to the counter can also come from an external source. Two of the comparison scan set and clear the Dataway Inhibit. Numbers in the eight registers (or fewer, if less than eight pulse sources are required) must be stored in increasing numerical order for proper timing of  utput pulses. Two control registers provide programmable control of the clock frequency (one hertz to one megahertz), the number of channels that generate a pulse (one to eight), the assertion of Dataway Inhibit, and whether to stop or recycle after the last pulse. The bit assignments in the registers are shown on the following page. Bits 1, 2, 3 = N, where clock frequency = 10NHz (N = 7 selects the external input) Bits 4, 5, 6 = P, where P + 1 = number of channels that generate a pulse Bits 7 = 1 to continuously cycle, 0 to cycle once and stop. All inputs and outputs appear on front-panel LEMO connectors as well as on the 36- pin P.C. connector at the rear of the module.
Condition:
AS IS government surplus item.
Picked up from a discontinuing facility in unknown condition.
Photos represent the exact item that will be shipped. Please refer the photos.
---
Shipping Policies
We take great care in packaging every item to ensure safe & quality shipping.
We ship UPS/USPS/FedEx/DHL depending on your location and at our discretion.
Most shipments are sent out within 1-2 business day after payment is confirmed or cleared, unless stated otherwise in the listing.
Please make sure to provide the correct shipping address when placing your order, orders can only be shipped out to the confirmed shipping address provided by eBay.
Packages are not shipped on Sunday. As transit time varies by carrier, we are unable to control delays caused by carriers.
Shipping time provided by eBay is an estimation and is not guaranteed. It is also subject to change during peak periods.
Buyers are responsible for complying with all import and export obligations and for payment of all applicable duties and custom fees.
Orders shipping to Hawaii, Puerto Rico, Guam or Alaska may not select the Free Shipping option for this item, if free shipping is selected for one of these destinations, we reserve the right to cancel your order.
Return Policies
Items must be returned in the original manufacturer's packaging. We strongly recommend you keep your packaging for at least the first 30 days after purchase.
We offer a 30 day return policy on all items. (unless stated otherwise in the listing).
Video games must be returned unopened. If the item is defective, it can be returned within 15 days with a receipt and the original packaging.
Defective items may only be exchanged for the same title.
All returns must be in original condition and must include the original packaging and content intact.
Returns must be packed in proper packaging to avoid damage to the item or its original packaging.
For any return requests please contact us to receive a RMA number and return instructions.
10% - 20% restocking fee may apply.
Please allow 3-5 business days after we receive your package to process your return.
Any returns that violate this return policy will not be accepted and will be sent back at the customer's expense.
The following electronics items must be returned within 15 days of receipt:
Computers, Computer hardware, Printers (including 3D printers), 3D printing supplies and products, Camcorders, Digital cameras, GPS units, Digital music players, Tablets, E-readers, Portable video players, Drones, Video Game Consoles, Video Games.
Contact Us
We take joy in helping you get the gear you want at the price you need.
Please don't hesitate to contact us with any questions or concerns.
You can contact us via eBay message.
Products
Most of our photos are of the actual item you are purchasing.
We work hard to include a lot of pictures of each item. We do our best to describe the items and their conditions. Please see item photos for all the details.
All components are as shown in the photos, no additional parts will be shipped.
Please note that some of the product descriptions are provided by manufacturers and may not represent the exact color, size or style of the actual item.